March Maintenance
I suppose it's possible that I'm the only person in the world thatdidn't realize March pumps require periodoc oiling. Shameful but true, I've been listening to my pumps occasionally squeal for months. After a little digging (much thanks to the helpful folks at Homebrewtalk.com) I found a pdf document from the manufacturer describing what oil, where to add, and how often to do so. My pumps are again smooth and quiet, just like their first use. So here's a heads up to all brewers with magnetic drive pumps...oil those guys twice a year with 20W non-detergent oil (4 to 5 drops in each resevoir will do). Happy brewing.



3 Comments:
Eric,
Thanks for the tip. I read the PDF but cannot figure out exactly where to add the oil? Can you be more specific as to where the drops of oil need to go.
Thanks
Chris
Eric,
I found the hole locations where the oil should go.
Thanks for the tip.
Chris
Yep...not sure what model you have, but on mine the pump label reads "Oil Here" with arrows. Ya think I might have caught that ;)
Post a Comment
<< Home